Precision CNC Machining, Rapid prototyping, and Custom parts

About John

This author has not yet filled in any details.
So far John has created 727 blog entries.

Designing Sheet Metal Parts for Robotic Welding

Explore Sheet Metal Processes & Supplier Selection A robotic welding cell produces beautiful welds on one part and misses half the joint on the next, because the part tolerances, the joint access, and the fixture repeatability were designed for a human welder, not for a robot. Robotic welding thrives on consistency: the robot repeats the

By |2026-10-11T15:19:39+08:00September 16th, 2026|

Designing Louvers and Vents in Sheet Metal

Explore Sheet Metal Design, Materials & Assemblies An electronics enclosure needs airflow, and the first design cuts a row of rectangular holes in the panel — which solves the heat problem and creates an EMI and dust problem. Vents in sheet metal are a trade between airflow, shielding, protection, and cosmetics, and the trade is

By |2026-10-11T15:20:23+08:00September 16th, 2026|

Soft-Touch Prototypes: Overmolding vs Urethane Casting vs TPU 3D Printing

Explore Vacuum, Urethane & Metal Casting Guides A product team needs a soft-touch prototype that feels like the production grip, and the process options split three ways: overmold the soft material onto a substrate, cast it with a flexible urethane, or print it in TPU. Each route delivers a different combination of feel, durability, appearance,

By |2026-11-07T20:53:21+08:00September 16th, 2026|

Master Patterns for Silicone Molds: 3D Printing vs CNC vs Cast Masters

Explore 3D Printing Processes & Comparisons Every silicone mold is a copy of something, and the quality of the cast part is set before the silicone is poured: the master pattern’s surface, geometry, and durability transfer into the mold and then into every part. Choose the master route badly and the mold repeats the master’s

By |2026-10-29T22:51:01+08:00September 16th, 2026|

Controlling Weld Distortion in Sheet Metal Assemblies

Explore Sheet Metal Processes & Supplier Selection A welded enclosure frame measures perfectly on the bench before welding and bows 3 mm across its open face the morning after. The welder did not do anything wrong; the heat of welding made the metal expand locally and then contract as it cooled, and the thin sheet

By |2026-10-11T15:19:32+08:00September 16th, 2026|

Incoming Quality Inspection for Machined Parts: What to Check and How

Explore CNC Cost, Tolerances & Supplier Selection A machined batch arrives with a clean certificate of conformance, and the first assembly jams because the bore is 0.02 mm undersized at depth. The supplier’s report shows the bore “within tolerance” — measured at the mouth, where the gauge could reach. Incoming inspection exists to catch exactly

By |2026-10-11T12:13:33+08:00September 15th, 2026|

Plastic Extrusion Tolerances and Material Behavior for Custom Profiles

Explore Custom Extrusion Guides A plastic profile that measures perfectly at the extruder arrives undersized at the customer, because the profile kept shrinking after it was cut and cooled. Plastic extrusion tolerances are a material behavior story: the profile is shaped hot and cools to its final size, and the shrinkage, the cooling, and the

By |2026-10-11T12:38:12+08:00September 15th, 2026|

Designing Parts for Plating and Anodizing: Racking, Edges, and Threads

Explore Anodizing, Conversion Films & Coatings A batch of anodized aluminum parts comes back with light spots at two corners — exactly where the parts hung on the rack during processing. The spots are not a coating defect; they are rack marks, and they were designed in when the drawing did not say which surfaces

By |2026-10-11T15:26:27+08:00September 15th, 2026|

Thread Inspection: Pitch Diameter, Go/No-Go Gages, and Reporting

Explore Quality, DFM & Procurement Guides A threaded part passes its go/no-go gauge at the supplier and jams on the mating screw at assembly. The gauge said the pitch diameter was in range, and the screw still will not fit — because the thread is tilted, or the coating closed the fit after gaging, or

By |2026-10-11T15:28:21+08:00September 15th, 2026|

Magnesium vs Aluminum vs Titanium for Lightweight Machined Parts

Explore CNC Design & Material Selection A drone frame redesign needs to lose weight, and the material table offers three answers: magnesium is lightest, aluminum is the balanced default, and titanium is strongest for its weight. The table does not decide the part — the loading, the environment, and the manufacturing route do. Magnesium saves

By |2026-10-11T12:11:45+08:00September 15th, 2026|
Go to Top