Precision CNC Machining, Rapid prototyping, and Custom parts

About John

This author has not yet filled in any details.
So far John has created 727 blog entries.

Laser Cutting Stainless Steel: Nitrogen vs Oxygen and Edge Quality

Explore Sheet Metal Processes & Supplier Selection Two stainless parts cut from the same sheet look different at the edge: one has a clean, bright, vertical edge, and the other has a dark oxide layer that must be removed before welding or painting. Both were laser cut — one with nitrogen assist gas and one

By |2026-10-11T15:19:32+08:00September 19th, 2026|

5052 vs 6061 Aluminum for Sheet Metal Parts

Explore Sheet Metal Design, Materials & Assemblies A sheet-metal enclosure drawing specifies 6061-T6 because the datasheet shows a higher yield strength, and the shop calls back before cutting: at the specified bend radius, 6061-T6 will crack. The engineer who chose the alloy was comparing strength values without comparing formability — and in sheet metal, the

By |2026-10-11T15:20:21+08:00September 19th, 2026|

Bead Blasting Media Types: Glass, Ceramic, Aluminum Oxide, and Steel Shot

Explore Surface Preparation, Plating & Inspection A bead-blasted part comes back with a matte finish that looks right and a surface that is wrong: the media embedded in the soft aluminum, or the aggressive grit cut the surface deeper than the finish required. Blasting is not one process with one result — the media type,

By |2026-10-11T15:27:18+08:00September 19th, 2026|

Electroless Nickel vs Electrolytic Nickel Plating: Which Fits Your Part

Explore Anodizing, Conversion Films & Coatings A machined valve body needs nickel plating inside a 40 mm deep bore, and the first plating quote says “electrolytic only” while the second says “electroless, no problem.” The two quotes are not competing on price; they are describing different processes with different coverage behavior. Electrolytic nickel uses an

By |2026-10-11T15:26:30+08:00September 19th, 2026|

Black Oxide vs Phosphate Coating for Steel Parts

Explore Surface Preparation, Plating & Inspection A shipment of steel fasteners arrives with a matte black finish and a note on the certificate: “black oxide, oiled.” Three months later, in a humid warehouse, the same fasteners show rust bloom, and the buyer blames the coater. The coating did what conversion coatings do: it converted the

By |2026-10-11T15:27:17+08:00September 17th, 2026|

Tin Plating for Solderability and Conductivity on Copper Parts

Explore Anodizing, Conversion Films & Coatings Copper conducts electricity superbly, but bare copper oxidizes quickly, and the oxide raises contact resistance and kills solderability. Tin plating is the standard answer: a tin layer protects the copper from oxidation, stays solderable, and conducts well enough for most current-carrying parts. Tin-plated busbars, contacts, and terminals are everywhere

By |2026-10-11T15:26:39+08:00September 17th, 2026|

Hemming and Seaming in Sheet Metal: Joint Types, Strength, and Design

Explore Sheet Metal Design, Materials & Assemblies A sheet-metal panel with a raw edge is a safety hazard, a corrosion start, and a stiffness miss all at once — and the fix is a hem: the edge is folded back on itself to create a smooth, stiff boundary. Hems and seams are the sheet-metal way

By |2026-10-11T15:20:21+08:00September 17th, 2026|

ASTM B633 Zinc Plating Classes: Thickness, Corrosion, and How to Specify

Explore Anodizing, Conversion Films & Coatings A zinc-plated fastener drawing says “zinc plate per ASTM B633,” and the plater must choose the class, the finish, and the chromate without guidance — so the part comes back with a thin coating and a clear passivate that meets neither the corrosion requirement nor the appearance. ASTM B633

By |2026-10-11T15:26:42+08:00September 17th, 2026|

Hard Anodizing vs Standard Anodizing: Type II vs Type III Explained

Explore Anodizing, Conversion Films & Coatings “Anodizing” covers two very different engineering choices. Type II (standard or decorative anodizing) is the finish most people picture on consumer aluminum: a thin, uniform oxide layer that can be dyed in a wide color range. Type III (hard anodizing or hard coat) is a thicker, denser oxide layer

By |2026-10-11T15:26:31+08:00September 17th, 2026|

When to Freeze a Prototype Design: Criteria for Stopping Iteration

Explore Rapid Prototyping & Low-Volume Guides Prototype programs fail in two directions: they freeze too early, committing to a design that has not answered its open questions, or they never freeze, polishing a design while the schedule and the budget drain away. The freeze decision is the moment the program stops learning by iteration and

By |2026-10-11T15:02:16+08:00September 17th, 2026|
Go to Top