Precision CNC Machining, Rapid prototyping, and Custom parts

About John

This author has not yet filled in any details.
So far John has created 727 blog entries.

CNC Machining for EV Charging and Power Electronics Housings

Explore CNC Applications & Precision Components An EV charger housing that cools perfectly in the lab derates in the sun, a power-electronics enclosure that seals against rain traps the heat that shortens the electronics, and a cable entry that looks sealed lets in water after a season of thermal cycling. Charging hardware lives outdoors, carries

By |2026-10-29T23:03:26+08:00September 5th, 2026|

CNC Machining for Laboratory and Analytical Instruments

Explore CNC Applications & Precision Components Laboratory instruments are precision machines with a tolerance story that is different from production hardware: they carry optics, sensors, and moving stages that must stay aligned through temperature changes and years of service, and they are often built in small quantities where every part is a first article. The

By |2026-10-11T12:16:27+08:00September 5th, 2026|

Specifying Surface Finish on 3D Printed Parts: As-Printed vs Post-Processed

Explore 3D Printing Processes & Comparisons A 3D printed housing looks smooth in the vendor’s sample photo and arrives with visible layer lines and a grainy texture. The vendor did not ship a bad part; the buyer specified “smooth finish” without defining the process, the orientation, or the acceptance sample — and every printing process

By |2026-10-11T15:00:34+08:00September 5th, 2026|

Threads in 3D Printed Parts: Printed Threads, Taps, and Inserts

Explore 3D Printing Processes & Comparisons A 3D printed part with a thread that strips on the third assembly is not a printing failure; it is a thread-strategy failure. Printed threads, tapped holes, and inserts each have a place, and the choice depends on the material, the load cycles, and whether the part will ever

By |2026-10-11T15:00:34+08:00September 5th, 2026|

Metal 3D Printing Post-Processing: Support Removal, Heat Treatment, and Finishing

Explore 3D Printing Design, Materials & Finishing A metal 3D printed part is not finished when the build completes; it is a blank on a plate, full of residual stress, covered with supports, and carrying a surface that no drawing would accept. The post-processing chain — depowdering, stress relief, support removal, machining, and finishing —

By |2026-10-11T15:01:21+08:00September 5th, 2026|

What Affects 3D Printing Cost: Volume, Material, Finish, and Post-Processing

Explore 3D Printing Design, Materials & Finishing You upload the same enclosure file to two printing services and receive quotes that differ by more than half. Neither price is wrong, and the gap is not markup: one service packed your part poorly, one is charging for a finish the other includes free, and one quoted

By |2026-10-11T15:01:21+08:00September 5th, 2026|

3D-Printed Molds for Low-Volume Silicone and Urethane Casting

Explore Vacuum, Urethane & Metal Casting Guides A product team needs a small run of silicone or urethane parts and faces a mold-making decision: machine a metal mold at high cost and long lead time, or print a mold and start casting in days. For low-volume runs, 3D-printed molds bridge the gap — the printed

By |2026-10-11T12:34:43+08:00September 5th, 2026|
Go to Top