Precision CNC Machining, Rapid prototyping, and Custom parts

About John

This author has not yet filled in any details.
So far John has created 727 blog entries.

SLA vs SLS: Choosing Between Resin Detail and Nylon Durability

Explore 3D Printing Processes & Comparisons The two quotes look close enough that the decision gets deferred to whoever is available, and the part is then printed in a process that cannot answer the question the test was written to answer. SLA and SLS overlap on cost for small quantities and on lead time for

By |2026-10-11T15:00:42+08:00September 28th, 2026|

SLA 3D Printing Service: How to Specify Resin Parts That Arrive Ready to Test

Explore 3D Printing Processes & Comparisons A resin prototype that comes back warped, chalky, or scarred on the one face that seals against a gasket costs more than the part: it costs the review meeting, the test slot, and a second round of approvals. The specification you send with an SLA 3D printing service decides

By |2026-10-11T15:00:37+08:00September 28th, 2026|

MJF 3D Printing: Repeatable Nylon Parts From Prototype to Bridge Production

Explore 3D Printing Design, Materials & Finishing The moment a nylon part moves from a one-off prototype into a repeat order, the questions change. Nobody asks whether the geometry is printable any more; they ask whether the fifth batch will match the first, whether the price per part drops once the build is packed properly,

By |2026-10-11T15:01:27+08:00September 28th, 2026|
Go to Top