Precision CNC Machining, Rapid prototyping, and Custom parts

About John

This author has not yet filled in any details.
So far John has created 727 blog entries.

Powder Coating on Aluminum: Pretreatment, Adhesion and Edge Coverage

Explore Anodizing, Conversion Films & Coatings Aluminium is a common substrate for powder coating and a more delicate one than it first appears. The surface carries a natural oxide layer that forms within minutes of cleaning, it conducts heat far better than steel so thin sections heat and cool quickly, and it is soft enough

By |2026-10-11T15:26:04+08:00September 23rd, 2026|

Plating on Aluminum: Zincate Pretreatment and Adhesion That Survives

Explore Anodizing, Conversion Films & Coatings Plating aluminium is a routine industrial process and a frequent source of failures, for the same reason in both cases: the metal carries an oxide layer that reforms the moment it is cleaned. Depositing a coating onto that layer produces a part that looks correct and blisters in service.

By |2026-10-11T15:26:09+08:00September 23rd, 2026|

Hard Chrome vs Electroless Nickel: Wear, Corrosion and Dimensional Build-Up

Explore Anodizing, Conversion Films & Coatings Both coatings are used to make a metal surface harder and more corrosion resistant, both build thickness on the part, and both are commonly specified on hydraulic rods, molds, wear plates and precision shafts. The differences that decide between them appear under load and in the geometry: one deposits

By |2026-10-11T15:26:08+08:00September 23rd, 2026|

Powder Coating Service: Specifying Color, Texture and Durability

Explore Anodizing, Conversion Films & Coatings Powder coating is the cheapest way to give a metal part a durable, uniform finish, and the fastest way to lose a batch if the specification says only "black". The coating is applied dry and cured into a film, so its appearance and performance depend on the chemistry, the

By |2026-10-30T12:46:38+08:00September 23rd, 2026|

Passivation Service: Specifying ASTM A967 and AMS 2700 Correctly

Explore Surface Preparation, Plating & Inspection Passivation is the least visible finishing operation and one of the few that a customer's quality system will ask for by name. It is also widely misunderstood: it does not add a coating, it does not change dimensions, and it cannot repair a part machined from the wrong alloy

By |2026-10-11T15:27:18+08:00September 23rd, 2026|

Black Oxide Coating: Hot vs Cold Processing and What to Specify

Explore Surface Preparation, Plating & Inspection Black oxide is the finish that makes a steel part look like a machine component rather than a piece of stock, and it is also one of the thinnest coatings available. That combination explains most of the questions it attracts: which process to specify, how much corrosion protection it

By |2026-10-11T15:27:26+08:00September 22nd, 2026|

Pickling vs Passivation: What Stainless Parts Need After Welding

Explore Sheet Metal Processes & Supplier Selection A welded stainless assembly that rusts along its seams is one of the most common and most avoidable failures in fabrication. The weld has changed the metal at the joint: heat has burned away the protective oxide, chromium has been drawn into the scale, and the surface that

By |2026-10-11T15:18:56+08:00September 22nd, 2026|

CNC Machined Enclosures: Design Choices That Drive Cost and Sealing

Explore CNC Cost, Tolerances & Supplier Selection A machined enclosure is usually chosen for one of three reasons: the quantity is too low for a casting or a molding tool, the wall sections and interfaces are too demanding for sheet metal, or the product needs a sealed, machined face that only a cutting tool can

By |2026-10-11T12:12:05+08:00September 22nd, 2026|

Bead Blasting Aluminum: Avoiding Smearing, Peening and Dimensional Change

Explore Surface Preparation, Plating & Inspection Aluminium takes a beautiful satin finish from bead blasting and reacts to it differently from steel in ways that catch people out. It is softer, so the media deforms the surface more deeply; it smears rather than cutting cleanly, so embedded media and contamination become a real risk; and

By |2026-10-11T15:26:59+08:00September 22nd, 2026|
Go to Top