Precision CNC Machining, Rapid prototyping, and Custom parts

About John

This author has not yet filled in any details.
So far John has created 727 blog entries.

6061 Aluminum CNC Machining Cost Reduction: A DFM Case Study

Explore CNC Cost, Tolerances & Supplier Selection From tool interference and geometry optimization to an L-shaped extrusion strategy This is not a story about choosing the right cutter to produce a C0.5 chamfer. The question that changed our approach was much simpler: if the C0.5 exists only to break a sharp edge, why should the

By |2026-10-29T22:50:26+08:00August 26th, 2026|

Designing for 3D Printing: Overhangs, Wall Thickness, and Lattice Structures

Explore 3D Printing Design, Materials & Finishing Physics Sets the Rules, Not the Software Printing builds a part layer by layer, and every layer must be supported by the layer below it. That simple fact produces the design constraints: overhangs beyond a certain angle need supports, thin walls may not form, and features that bridge

By |2026-10-11T15:01:10+08:00August 26th, 2026|

3D Printing for Tooling and Fixtures: Jigs, Gauges, and Assembly Aids

Explore 3D Printing Processes & Comparisons Tooling is the fastest payback for 3D printing. A jig, gauge, or assembly aid can be designed and printed in days, tested on the line, and revised when the product changes—without waiting for a machined fixture or paying for a mold. The economics work because tooling is custom, low-volume,

By |2026-10-11T15:00:22+08:00August 26th, 2026|

3D Printing Tolerances by Process: What Designers Should Specify

Explore 3D Printing Design, Materials & Finishing Printing Tolerances Are Process-Specific 3D printing tolerances are process-specific: SLA holds finer detail than FDM, SLS and MJF sit in between, and metal processes have their own behavior. Specifying a printed part's tolerance means matching the requirement to the process's real capability and reserving critical fits for post-printing

By |2026-10-11T15:01:05+08:00August 26th, 2026|

TPU and Flexible Materials in 3D Printing: Seals, Gaskets, and Soft-Touch Parts

Explore 3D Printing Design, Materials & Finishing A housing that needs a sealing lip, a handheld device that needs a soft grip, or a wearable that must flex thousands of times without tearing—these are the parts where rigid printing reaches its limit and thermoplastic polyurethane (TPU) starts. TPU prints parts that bend, compress, and spring

By |2026-10-11T15:01:11+08:00August 26th, 2026|

Prototype Testing Methods: Fit Checks, Functional Tests, and Field Trials

Explore Rapid Prototyping & Low-Volume Guides Prototype testing exists to convert parts into decisions. The choice of method determines what a prototype can prove: a fit check validates assembly, a functional test validates behavior, and a field trial validates use in the real world. Each requires a different prototype, a different measurement approach, and a

By |2026-10-11T15:01:56+08:00August 25th, 2026|

Prototyping for User Testing and Design Validation

Explore Rapid Prototyping & Low-Volume Guides User testing is where a product design meets reality: the user holds the part, tries the action, and reveals whether the design works from a human perspective. The prototype for user testing has to answer questions that a CAD review cannot: how it feels, how it holds, how it

By |2026-10-11T15:01:59+08:00August 25th, 2026|

Prototype Finishes That Match Production: Anodizing, Painting, and Texture

Explore Anodizing, Conversion Films & Coatings The gap between a prototype and a production part is often in the finish. The geometry is the same, but the anodized production cover looks different from the printed or machined prototype beside it, and a finish mismatch can sink a design review at the last minute. Matching prototype

By |2026-10-11T15:26:22+08:00August 25th, 2026|

3D Printing for Robotics: Grippers, Brackets, and Custom Enclosures

Explore 3D Printing Processes & Comparisons Robotics development is an iteration game: the mechanism changes, the sensor moves, the payload grows—and the hardware has to keep up. 3D printing matches that pace. Grippers, brackets, sensor mounts, and custom enclosures print in days, test on the robot, and change with the next revision. This guide maps

By |2026-10-11T15:00:23+08:00August 25th, 2026|
Go to Top