Precision CNC Machining, Rapid prototyping, and Custom parts

About John

This author has not yet filled in any details.
So far John has created 727 blog entries.

CNC Machining for Medical Devices: Classification, Cleanliness, and Validation

Explore CNC Applications & Precision Components Medical device manufacturing is different from making a bracket for an industrial product because the parts carry regulatory weight. A machined medical part is not just a piece of metal or plastic; it is evidence in a submission, subject to classification, cleanliness, and validation requirements that a standard job

By |2026-10-11T12:15:07+08:00August 17th, 2026|

Swiss Machining Guide: Small-Diameter Precision and the Guide Bushing

Explore CNC Milling, Turning & EDM Swiss-type machining is the production process for small, precise, cylindrical parts, and its defining feature is the guide bushing. The bar is held in the bushing close to the cutting edge and the sliding headstock feeds it past the tools, so the cutter always works on a short, supported

By |2026-10-11T12:10:51+08:00August 17th, 2026|

CNC Machining Plastics: How to Select the Right Grade

Explore CNC Design & Material Selection Selecting a plastic grade for CNC machining is where projects either sail or stall. The material decides stiffness, heat resistance, chemical compatibility, surface finish, dimensional stability, and cost, and the wrong pick can make a part fail long before the machine matters. Plastics machine differently from metals: they expand

By |2026-10-11T12:11:23+08:00August 16th, 2026|

How to Choose a CNC Machining Supplier: Vetting, Scoring, and Pilot Orders

Explore CNC Cost, Tolerances & Supplier Selection Every machining supplier can send a quote. The difference between a good partner and an expensive lesson shows up in the quality-control/">first articles, the inspection records, and what happens when the drawing changes. This article gives a practical process for building a shortlist, scoring candidates on the things

By |2026-10-11T12:12:42+08:00August 16th, 2026|

Rapid Prototyping for Consumer Electronics: EVT, DVT, and PVT

Explore Manufacturing Application Guides The Stage-Gate Framework for Consumer Electronics Consumer electronics development moves through three engineering validation stages: EVT proves the design works, DVT proves it meets the specification, and PVT proves it can be manufactured repeatedly. Each stage has its own prototypes, deliverables, and gate criteria, and the gate decides whether the program

By |2026-10-29T23:14:24+08:00August 16th, 2026|

Liquid Silicone Rubber Molding: Process, Design, and Validation

Explore Injection Molding Materials, Defects & Validation Liquid silicone rubber, or LSR, is a two-component silicone that is metered, mixed, injected into a heated mold, and cured in place. Because the material is liquid at injection, it fills fine detail and thin walls easily, and because it cures by heat, the cycle can be fast

By |2026-10-30T12:39:50+08:00August 16th, 2026|

CNC Machining vs Metal Casting: How to Choose at Your Quantity

Explore Vacuum, Urethane & Metal Casting Guides The real question in a machining-versus-casting comparison is not "which process is better" but "which process is cheaper for this geometry at this quantity, after all the finishing steps are included." Machining starts with no tooling and a straightforward per-part cost; casting starts with a mold and a

By |2026-10-11T12:33:10+08:00August 16th, 2026|

Laser Cutting vs Waterjet Cutting: Material, Thickness, and Edge Selection

Explore Sheet Metal Processes & Supplier Selection Laser cutting melts and vaporizes material with a focused beam; waterjet cutting erodes it with a high-pressure stream of water and abrasive. The practical difference is not speed alone but three variables: the material, the thickness, and what the cut edge must survive. Thin metals favor the laser

By |2026-10-11T15:19:25+08:00August 16th, 2026|

How to Design a Sheet Metal Enclosure: IP, EMI, Thermal, and Assembly

Explore Sheet Metal Design, Materials & Assemblies A sheet metal enclosure is not just a box; it is the interface between the electronics inside and the environment outside. The engineering decisions that matter are the protection rating, the electromagnetic boundary, the thermal path, the sealing plan, the fasteners, and the assembly datums that tie the

By |2026-10-11T15:20:05+08:00August 16th, 2026|

Overmolding vs Insert Molding: A Process Selection Guide

Explore Injection Molding Assembly & Process Control Guides Overmolding and insert molding both combine a molded plastic part with a second component, but they answer different functional questions. Overmolding adds a second material to the surface for grip, sealing, or appearance; insert molding embeds a discrete component, usually metal, inside the plastic for threads, contacts,

By |2026-11-07T20:53:59+08:00August 16th, 2026|
Go to Top