Michael Wang

Founder & Mechanical Engineer

As the founder of the company and a mechanical engineer, he has extensive experience in advanced manufacturing technologies, including CNC machining, 3D printing, urethane casting, rapid tooling, injection molding, metal casting, sheet metal, and extrusion.

Table Of Contents

Explore CNC Cost, Tolerances & Supplier Selection

Two files can carry one revision label and still describe different parts. A STEP model may contain the latest pocket while the drawing retains an earlier depth or finish note. A CNC quote checklist should catch that mismatch before the shop estimates the work, because a price based on conflicting inputs cannot define a dependable order.

Files shops actually open

A CNC quote checklist should confirm usable geometry, a controlled drawing or model specification, material condition, functional datums, finishing requirements, quantity, and revision. Open the exported files, compare their critical features, and identify which document governs each requirement. Ask the supplier to record unresolved assumptions before accepting the quotation as the manufacturing scope.

Send a suitable neutral model, such as STEP, together with the controlled specification needed to interpret it. NIST’s STEP File Analyzer and Viewer supports viewing and examining geometry, manufacturing information, and certain format problems. A successful export does not automatically prove that every required attribute arrived correctly.

Autodesk’s STEP export guidance documents format and geometry-approximation options in that software version. Check the chosen format and exported result in the receiving workflow. Identify units, part identity, and whether the file represents one component or an assembly before submitting the CNC machining inquiry.

Datums and critical-to-function notes

Mark the interfaces that control assembly rather than covering the drawing with equally tight dimensions. Identify locating surfaces, bearing or sealing features, mounting relationships, and any critical wall or shoulder. Explain the functional requirement where it helps the supplier choose an appropriate setup.

ASME Y14.5 provides a recognized language for geometric requirements. State the applicable drawing convention and edition where relevant, then resolve ambiguous legacy notes before quotation. A datum label must correspond to a usable feature and a clear inspection interpretation.

Ask the supplier which relationships require a common setup, special workholding, or additional inspection. Include mating-part information when the isolated component drawing does not communicate the actual constraint. The purpose is to expose manufacturing decisions early, not to let the shop infer an undocumented tolerance from a photograph of an assembly.

Cutting tool machining a cylindrical metal part supported in a lathe
Identify the functional relationships that influence the machining setup.

Finish and secondary ops on the same quote

Put finishing and secondary operations in the same scope as machining. Identify the final material condition, coating or treatment, cosmetic surfaces, masked areas, protected threads, and the point at which dimensions must meet acceptance. A machined size before coating can differ from the finished size the assembly needs.

NASA’s anodizing process specification is an example of how an application-specific specification addresses drawing requirements and dimensional effects. It is not a default requirement for this project, and its process values should not be copied into an unrelated RFQ without engineering approval.

For the surface-finishing review, provide the actual required standard or approved sample where one exists. Distinguish functional roughness from visual appearance. Mitutoyo’s surface-roughness resource addresses the measurement topic; a general smooth note is not a substitute for the parameter and evaluation conditions required by the design.

Table: checklist before you hit send

Complete the package in a sequence that makes contradictions visible. First verify geometry and identity, then material and functional requirements, then the delivered condition and commercial release. A reviewer should be able to connect every requested operation to a file, drawing note, or agreed requirement.

Use the table as a submission check. It identifies what a supplier should be able to confirm without guessing and what question remains when the information is missing.

Checks before sending a machining RFQ
Item Evidence to attach Consistency check If unresolved
Geometry Exported CAD and controlled specification Same features, units, and revision Resolve the governing source
Material Grade, condition, and substitution rule Matches functional and finishing needs Request a separately identified alternative
Critical features Datums, limits, and marked interfaces Can be manufactured and inspected Request DFM clarification
Finished state Coating, masking, texture, and appearance requirements Acceptance occurs after relevant operations Clarify process sequence
Release Quantity by revision and required records Forecast and commitment distinguished Quote explicit scenarios

Quantity and revision control

State quantities by part number and revision. Separate prototype, first production release, and possible repeat demand. A forecast helps the supplier propose an approach, but it should not silently become the committed order quantity or justification for a fixture investment.

Use a file register or short cover sheet listing the governing files and revisions. When a drawing changes during quotation, send a clear replacement instruction and describe the changed features. Avoid several attachments with names such as final and final-new that force the supplier to choose a version.

Ask whether the quotation needs revision when the material, finish, inspection scope, or quantity changes. Record the accepted technical assumptions with the commercial document. For repeat orders, confirm that the approved revision and delivered condition still apply rather than assuming an unchanged part number proves that all manufacturing requirements are unchanged.

Common reasons quotes bounce back

Quotes return for clarification when the available evidence cannot define the work. Common examples include a model-drawing conflict, unspecified alloy condition, inaccessible critical geometry, ambiguous threads, or a coating instruction that conflicts with a finished dimension. Treat these as scope questions to resolve, not as administrative obstacles.

Review the standards and tolerances reference alongside the actual drawing. A service-page tolerance does not establish acceptance for every feature, material, or part size. Specify the critical requirements and ask the supplier to identify exceptions explicitly.

Respond with controlled changes rather than informal email permission to do what is easiest. If an alternative radius, tool access feature, or surface treatment is accepted, update the governing information or issue an identified deviation. That record protects the next reorder from inheriting an undocumented assumption. Keep unresolved requirements visible until engineering and purchasing agree what is being bought.

Optical measuring machine with a glass stage and computer display
Include the inspection requirements in the same quotation scope.

FAQ

These questions address specification details that should be settled before sample approval.

Can a native CAD file replace the drawing?

It can be the governing source if the agreed model-based specification contains all required information and the supplier can interpret it reliably. Otherwise, provide the controlled drawing or supplementary specification. Do not assume that visible model geometry includes every tolerance, material, finish, or inspection requirement. Agree the governing data and exchange method before releasing the work.

Should alternative materials be included in the same request?

Yes, when they are clearly identified as alternatives and the functional requirements permit evaluation. Ask for separate assumptions and the relevant technical consequences rather than an unspecified equivalent. Engineering should approve the selected material and condition before production. A lower quoted material cost does not establish interchangeability with the original grade.

What if the revision changes after the quotation is accepted?

Send the controlled revision and identify the changed requirements immediately. Ask the supplier to assess manufacturing, material, tooling, inspection, and schedule effects before continuing affected work. Record the revised scope or approved deviation. A new CAD attachment alone does not establish that every person handling the order has accepted the change.

Related process selection notes

Let the geometry and acceptance requirements guide process selection. A part with rotational features, deep pockets, or difficult access may need more than one operation or setup. Ask for the proposed sequence where it affects critical relationships, finishing, or inspection. The RFQ should define the result without pretending that a filename determines the process.

For 6CProto review, provide the CAD, controlled drawing, material and finish, quantity, and required reports. Identify the most important interface and the questions still open. A useful quotation response states its assumptions and the work needed to close those questions.

Upload the verified RFQ package to request a 6CProto quote and DFM review. Approve the technical scope and any accepted deviations with the quotation so that production begins from the same information your team reviewed.